PVC Pipe Bender

Introduction

PVC pipe bender based on international advanced technology. According to the market, we independently produce automatic PVC pipe bender.The PVC pipe bending machine can replace the traditional PVC pipe injection molding machine.Compared with injection molding machine, PVC pipe bender can save about 50% cost. StarsPlas aim to manufacture high quality machines at a reasonable price.

Technical Specification

NO.	Name	DESCRIPTION
1	Size	3500*2250*2250mm
2	Pipe range（OD）	Φ100mm
3	Heating Method	Ceramic Infrared heating
4	Ceramic plate	ELSTEIN, Germany
5	Quantity of ceramic plate	42 pcs
6	Hydraulic station	1
7	Chiller of hydraulic oil	1 set
8	Oil pump power	5.5kw
9	Quantity of oil pump	1
10	Pipe rotate motor	0.09kw x 1
11	Up-down motor	0.75kw x 1
12	Total heating Power	32kw
13	Cooling method	Air cooling
14	Forming type	Bend
15	Socket type	U type
16	Hydraulic oil	46# wear resistance hydraulic oil
17	Max heating temperature	450℃
18	Air pressure	0.6-0.8Mpa
19	Water pressure	0.2-0.3Mpa
20	Oil Pressure	10Mpa
21	Energy accumulator	1 or 2 sets
22	Air bag	1 set
23	Working method	Automatic
This machine can bend 1 pc of pipe each time

Main Components

No.	Name	Brand
1	PROGRAMMABLE CONTROLLER -PLC	SIEMENS
2	Touch Screen – HIM	SIEMENS
3	Temperature Controller Module	SIEMENS
4	AC contactor	SCHNEIDER OR SIEMENS
5	Low-voltage circuit breakers	SCHNEIDER
6	Electrical motor circuit breaker	SCHNEIDER
7	Intermediate relay	SCHNEIDER
8	Indicator light	SCHNEIDER
9	Two-bit and three-bit knobs	SCHNEIDER
10	Emergency Stop button	SCHNEIDER
11	Switch power	SCHNEIDER
12	Motor and reducers	Chinese high-quality brand
13	Pneumatic cylinder	AIRTAC
14	Pneumatic solenoid valve	AIRTAC
	ALL OF ELECTRICAL CONTROL COMPONENTS ARE ACCORDING TO THE INTERNATIONAL SAFETY CERTIFICATION IDENTIFICATION.

Product Display