The necessity of PVC automatic mixing system

The necessity of PVC automatic mixing system

PVC automatic mixing system is economic friendly

In nowadays’s PVC production plants,Most factories let workers to weigh various raw materials and accessories.

This practice is possible in the small factory era. But in large factories, for example, when the raw material mix exceeds 1000kg per hour, its uneconomical characteristics begin to stand out.

Such as:

1.The number of workers required is large. The wages of workers are soaring. And the importance of physical health has caused the labor costs to rise rapidly.

 

2.Due to the emotionalization of personnel, working in a boring work environment for a long time, it is inevitable that the problem of inaccuracy and mismatch of weighing will occur, resulting in significant losses.

 

Therefore, the application of automatic weighing and batching, mixing and conveying systems is necessary. This system is suitable for large-scale production. And the economic benefits are obvious for plants with a production capacity exceeding 1000 kg/hr.

 

 

PVC automatic mixing system is easy runing

The mixing machine is relatively uniform and loose during the mixing process. During the running process, the dead ends are rarely seen. The equipment discharging is very convenient and easy to clean. The mixing machine has high production efficiency.

When it is in the process of running, is not easy to appear in the case of wear.

The drying function of the mixer is very convenient. When using it, you can directly switch the switch on the electric instrument panel to the dry gear. And effectively set the temperature required for the equipment on the temperature control table of the equipment. When the set temperature is reached, the automatic mixing system will stop running. The mixer has the function of color mixing during operation. When it is used, it is necessary to effectively switch the switch of the electrical instrument to its color mixing gear. And then effectively set the protection temperature of the raw material on the thermometer when it is mixed. The material reaches its protective temperature so that the machine stops working.

What is mixer?

A mixer is a machine that uniformly mixes two or more materials by mechanical force, gravity, or the like. Hybrid machines are widely used in various industries and daily life. The mixer can mix a variety of materials into a homogeneous mixture, such as mixing cement, sand, gravel and water into concrete wet materials; it can also increase the contact surface area of the material to promote chemical reactions; it can also accelerate physical changes, such as granular The solute is added to the solvent, and the dissolution and mixing can be accelerated by the action of the mixing machine. Generally speaking, no matter the novice veteran, it is strictly in accordance with the operating specifications of the mixer.

The structure of the  automatic mixing system.

The professional automatic mixing system is widely used in the mixing of powders and powders (solid-liquid) such as chemicals, dyes and rare earths. Its structure is as follows: 1. The reducer is the main transmission structure of the mixer. It is located at the top of the barrel. It is installed in the base machine during operation. The shaft is hollow and equipped with fixed keys, which can make large plastic vertical mixer. The paddles are free to assemble and disassemble. 2. The barrel is three-dimensional, made of stainless steel, with built-in vertical mixing blades and placed in the barrel. 3.Beer reducer, the professional automatic mixing system works when the motor is driven by the motor in the machine base to drive the worm to rotate the mixing screw in the mixing drum clockwise, so that the large mixed materials can be discharged at one time.