The Dust Collector

The Dust Collector adopts standardized design,perfect quality control and modular assembling method,and adopts low pressure injection technology to thoroughly change the dust cleaning method.

Technical Specification

Parameter Details

1.Dusty flue gas enters the ash hopper.

2.Some larger dust particles fall directly into the ash hopper due to inertial collision and natural sedimentation.

3.Other dust particles enter into each bag chamber with the airflow.

4.After the filter bag is filtered, the dust is blocked on the outside surface of the filter bag, and the purified gas is discharged into the atmosphere by an induced draft fan from the inside of the filter bag.

 Features :

1. High efficiency≥99.5%

2. Low emission concentration ≤20um, but also ≤10um is possible after filtering according to practical situation

3. Low leakage rate

4. Material—carbon steel or stainless steel.

5. Simple Structure, easy maintenance

6. Suitable bags and bag cages fitted according to dust properties. Glass Fiber, needle felt, PTFE, p84., etc

7. The overhaul and bag replacement can be carried out for separate chamber under the condition that system blower and system run normally.

8. The whole set of equipment is controlled by PLC to realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm

9. It is not sensitive to the characteristics of the dust, and it is not affected by dust and resistance.

 You may be interested in:

1. What’s the advantage of Dust Collector for SPC flooring?
2. What’s the Dust Collector for SPC flooring?
3. What’s the cost of the Dust Collector for each sqm or sqft?
4. Which is the best Dust Collector for SPC flooring industry?

Please contact us for more details.